washing machine bearing repair

Most newer washing machines made in the last 10 to 15 years, especially front-loading washers, have bearings that help operate the machine. There are also top load washers that use bearings in the drive system, but it is more common in front load washers. The only thing that separates these bearings from the water is a seal. Over time, water seeps behind that seal and causes the bearings to rust and grind. Eventually this water will start to seep out of your machine, sometimes causing grease splatter or rust on (front load washer) or under (top load washer) the machine.

These signs will help you determine if your washing machine is failing:

• Loud noise in the spin cycle
• Rusty water splashes on the floor or inside the machine (to take a look at a front loader, simply remove the rear panel).
• For front load washers, sometimes the belt will keep slipping off the pulley.

What will happen if I don’t fix the bearings in my washing machine?

If the bearings are not repaired immediately, they can cause damage to other parts of the machine, such as the basket, spider arm, outer tub, and in some cases, electrical components. It is very important to fix this problem right away.

How much does it cost to replace the bearings in my washing machine?

Well, it depends on how you do it. If a repairman comes by, depending on whether you have a top loader or a front loader, he can charge anywhere from $300 to $500. There is another way to repair your bearings that is not “by the manual” (I’m mainly referring to load bearing repair frontal). If you do it yourself, you can save a lot of cash. In most cases, manufacturers do not sell separate outer tub bearings and seals. Whirlpool now offers a bearing kit for some models of top load washers. If you do it yourself, you can probably do the repair for less than $200. Front loaders are more difficult to repair, but some people have been doing their own repairs without replacing the outer tub by simply buying common bearings and a seal. The cost of the repair is now a fraction of the cost.

What if I am not mechanically inclined?

Some people aren’t mechanically inclined enough to replace the bearings in their washing machine, but that’s okay. You will need to call your local repair technician, but be aware that most local technicians will replace the outer tub on your washing machine, especially for front loaders, because this is what the manufacturer suggests. If you have a good repair guy, at least you have peace of mind knowing it was done right.

conclusion

You can save a bundle by repairing your washing machine bearings or you can leave it to a professional, the choice is yours. In the resource box below are a couple of links to more detailed information on how to repair your washing machine’s bearings.