Starting Your Crown Molding Project

Crown molding can enhance any room in any home, but sometimes the thought of a new project can be daunting for the average homeowner. Here is a step by step guide to get started with your project.

Step #1 – Plan your project. The first thing you need to do is measure the size of your room so you know how much crown molding you should buy for your project. Standard crown molding lengths are 8′ and 12′. Visit your local home improvement store or do some research online to find the type of crown molding you want to install in your room, and make sure the one you choose fits within your budget.

Step #2 – Installation planning. If you are a DIY type, then a thorough examination of how you will install your crown molding is a must. Do you plan to do it alone or will you ask for help? There are some great tools out there to give you an extra set of hands. Find out where you will start and where your seams will be in the room. Plan so your seams are in the most inconspicuous area of ​​the room and always use wood glue on your seams so they don’t open up in the way. It’s also a good idea to cut out some inside and outside corner templates to keep with your saw so you can keep mistakes to a minimum!

Step #3 – Finish Keys. Once the crown molding is done, it’s time to caulk and fill the holes. Use at least a 40 year putty to keep shrinkage and cracking to a minimum. Then apply wood filler to the nail holes, sand lightly and now you are ready to paint.

Step #4 – Paint. Hopefully, you plan on painting the entire room so that when you paint your wreath, you can apply the paint without having to worry about a clean line. It is much easier to cut the molding while the walls are being painted. Try to use color combinations that make the trim stand out! You will be much happier with the way your crown molding idea comes to life! The only thing left now is to enjoy the new look you have created!